The KRGS Series II Aluminium shutter has a 75mm interlocking slat curtain, manufactured from aluminum extrusion to provide an attractive appearance without compromising door security.
Ideal for shopping centres, shop fronts, club and hotel bars, counter tops, kiosks, arcades, serveries, sporting clubs and stadiums, airports, fire reel cupboards, schools and doorways.
Manual operation, push-up and pull-down with supplied pull stick. Shutters can be electrically motorised with key switch or remote control operation as an optional extra. Optional Battery Backup System available.
Supply and install Aluminium Shutter Series II manufactured by KRGS Roller Grilles and Shutters 02 9608 9888.
Clear anodised is the standard, whilst Dulux powder coat range is available as an optional extra.
Single aluminium shutters can be manufactured up to a width of 3600mm manual operation, maximum door width up to 6000mm when motorised. Larger openings can be fitted with multiple doors with a combination of standard or corner mullions.
A 12 month warranty against defective materials and workmanship applies.
Series II Aluminium Shutter Brochure
Technical Specs A
Technical Specs B
Technical Specs C
Technical Specs D
Technical Specs G
Technical Specs H
Technical Specs I
Technical Specs J
KRGS Wiring Diagram
The curtain is constructed using interlocked 75mm x 2.0mm heavy duty extruded aluminium slats. The design of the slat produces a V shape front surface to ensure strength. The ends of these aluminium sections are fitted with a nylon end clip to ensure quiet and smooth operation. Optional slotting with acrylic infills is available to provide a viewing area. Please consult your KRGS Technician about your requirements.
The bottom rail is manufactured from an extruded aluminium section 90mm in height and 25mm in width. The locking mechanism for the shutter is concealed in this rail and can be key operated from both sides.
Lcoking is a two way key mortice lock mounted in the centre of the bottom rail, that slides a steel shoot bolt out into the side guides. Optional locking position allows an option for locking rail at waist height from both inside and out. Multiple doors can also be keyed alike.
Side Guides are 50mm deep by 30mm wide extruded aluminium suitable for face fit or through the mouth of the guide if fitted between walls.
The standard 180 degree mullion is manufactured from an extruded aluminium section 150mm wide x 30mm; a steel shoot bolt secures the mullion into the floor. Special mullions are also available to suit a variety of degrees and applications. Special wide mullions can be manufactured to suit any angle shall be fabricated with 1.6mm aluminium sheet securely fitted to our standard side guides for angle openings where doors need to be stacked.
Brackets are manufactured from slotted 90mm x 40mm mild galvanized steel.
The drum is manufactured using a 150mm diameter tube if manual or if motorised it is a 229mm diameter tube with an internal spring designed to counterbalance the operation of the shutter.
Are you not sure which door is the best application for your project? KRGS’ White Paper will be able to assist in guiding you as to what door is best to meet your needs. A door design with you in mind, there is a KRGS product option to suit most of your requirements.