Aluminium Garage Door

The curtain is constructed using interlocked 97mm x 2mm heavy duty extruded slats. The design of the slat produces a flat front surface ideal for department store frontage. The ends of these aluminium slats are fitted with a nylon end clip to ensure quiet and smooth operation. Optional slotting with acrylic infills is available to provide a viewing area whilst smoke, exhaust and air relief can be obtained by using 6mm perforation. Please consult your KRGS Technician about your requirements.

Fully Slotted = 51% air flow and Fully Perforated = 32% air flow.

The bottom rail is manufactured from an extruded aluminium section 105mm in height and 45mm in width.

Locking is normally achieved via motorisation, small manual doors can be fitted with a locking mechanism to the bottom rail.

Side Guides are 105mm deep by 40mm wide extruded aluminium suitable for face fit with Schlegal Nylon Buffer.

Brackets are manufactured from 12mm mild steel.

The drum is manufactured using heavy gauge steel, designed to span the maximum width of 12000mm. High grade bearings rotate around a 35mm steel shaft used in conjunction with a helical coil spring designed to counterbalance the weight, are used to ensure smooth operation of the shutter.