CALL US NOW 1800 897 822
Counterline Shutter
Application
Shopping Centres, Shop Fronts, Club and Hotel Bars, Counter Tops, Kiosks, Arcades, Serveries and Doorways
Architectural Specification
Supply and install Counterline Shutter manufactured by KRGS 02 9519 7822
Specifications
The Counterline shutters can be manufactured up to a width of 3.0m or a total of 9 square metres. Larger openings can be fitted with multiple doors with a combination of standard or corner mullions.
Operation
Manual operation, push-up and pull-down with supplied pull stick. Shutters can be electrically motorised and then operated with various remote control or key switch.
Finish
Clear anodised is the standard, whilst Dulux powder coat range is available as an optional extra.
Warranty
A 12 month warranty against defective materials and workmanship applies.
Note: KRGS has a continuous program of development sizes or configuration of product may change at any time. For the latest in design and specification please consult with KRGS by calling us.
Curtain
The curtain is constructed using interlocked 44mm x 1.5mm extruded aluminium slats; the design of the slat produces a flat front surface ideal for counter shutter application. The ends of these aluminium sections are fitted with a nylon end clip to ensure quiet and smooth operation.
Bottom Rail
The bottom rail is manufactured from an extruded aluminium section 65mm in height and 10mm in width. The locking mechanism for the shutter is concealed in this rail and can be key-operated from both sides.
Locking
Locking is a two way key mortice lock mounted in the centre of the bottom rail, that slides a steel shoot bolt out into the side guides. Standard locking position allows for double-sided locking with operation from both inside and out.
Multiple doors can also be keyed alike.
Side Guides
Side Guides are 37mm deep by 25mm wide extruded aluminium suitable for face fit or through the mouth of the guide if fitted between walls.
Mullions
The standard 180 degree mullion is manufactured from an extruded aluminium section 130mm wide x 32mm; a steel shoot bolt secures the mullion into the floor or counter top. Special mullions are also available to suit a variety of degrees and applications.
Brackets
Brackets are manufactured from slotted 90mm x 40mm mild steel.
Drum
The drum is manufactured using a 60mm diameter tube fitted with an internal spring designed to counterbalance the operation of the shutter.
